array_files=new Array();
array_files[0]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14902S017.aspx","2008-08-14","9K","GM14902S017    ","GM14902S017     ","12V, 65.5:1 Gear Motor, 59 RPM     "," GM14902S017 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14902S017 GM14902S017 DC Brush Gearmotor 1.37 Diameter 65.5:1 ratio 500 oz-in Maximum Continuous Torque 4625 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 59 rpm no load speed Torque Constant (Kt) = 3.9 oz-in / amp Voltage Costant (Ke) = 2.88 v/krpm Resistance (R) = 0.45 ohms Inductance = 0.63 mH Rated Voltage = 12 volts Encoder: None Length (motor)= 4.56 225.74 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[1]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S026.aspx","2008-08-14","9K","GM9236S026    ","GM9236S026     ","24V, 65.5:1 Gear Motor, 71 RPM     "," GM9236S026 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S026 GM9236S026 DC Brush Gearmotor 1.37 Diameter 65.5:1 ratio 480 oz-in Maximum Continuous Torque 2585 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 71 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 146.56 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[2]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9413-1.aspx","2008-08-14","9K","GM9413-1    ","GM9413-1     ","12V, 5.9:1 Gear Motor, 474 RPM     "," GM9413-1 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9413-1 GM9413-1 DC Brush Gearmotor 1.37 Diameter 5.9:1 ratio 15 oz-in Maximum Continuous Torque 36 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 474 rpm No load speed Torque Constant (Kt) = 5.6 oz-in / amp Voltage Constant (Ke) = 4.14 v/krpm Resistance (R) = 8.33 ohms Inductance = 6.17 mH Rated voltage: 12 volts Encoder: None Length: 4.32 105.80 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[3]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S019.aspx","2008-08-14","9K","GM9236S019    ","GM9236S019     ","12V, 19.7:1 Gear Motor w/Encoder, 236 RPM     "," GM9236S019 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S019 GM9236S019 DC Brush Gearmotor with encoder 1.37 Diameter 19.7:1 ratio 153 oz-in Maximum Continuous Torque 860 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 236 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: 500 ppr encoder (A,B,I) Length (motor with encoder) = 4.33 254.83 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[4]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9634S003.aspx","2008-08-14","9K","GM9634S003    ","GM9634S003     ","24V,144:1 Gear Motor, 43 RPM     "," GM9634S003 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9634S003 GM9634S003 DC Brush Gearmotor 1.37 Diameter 144.0:1 ratio 500 oz-in Maximum Continuous Torque 3033 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 43 rpm No load speed Torque Constant (Kt) = 5.17 oz-in / amp Voltage Constant (Ke) = 3.82 v/krpm Resistance (R) = 2.96 ohms Inductance = 2.51 mH Rated voltage: 24 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 348.27 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[5]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9634S002.aspx","2008-08-14","9K","GM9634S002    ","GM9634S002     ","24V, 75.1:1 Gear Motor, 82 RPM     "," GM9634S002 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9634S002 GM9634S002 DC Brush Gearmotor 1.37 Diameter 75.0:1 ratio 265 oz-in Maximum Continuous Torque 1580 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 82 rpm No load speed Torque Constant (Kt) = 5.17 oz-in / amp Voltage Constant (Ke) = 3.82 v/krpm Resistance (R) = 2.96 ohms Inductance = 2.51 mH Rated voltage: 24 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque 348.27 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[6]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9413-5.aspx","2008-08-14","9K","GM9413-5    ","GM9413-5     ","12V, 728.0:1 Gear Motor, 4 RPM     "," GM9413-5 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9413-5 GM9413-5 DC Brush Gearmotor 1.37 Diameter 728.0:1 ratio 175 oz-in Maximum Continuous Torque 2913 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 4 rpm No load speed Torque Constant (Kt) = 5.6 oz-in / amp Voltage Constant (Ke) = 4.14 v/krpm Resistance (R) = 8.33 ohms Inductance = 6.17 mH Rated voltage: 12 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque 109.65 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[7]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9413-4.aspx","2008-08-14","9K","GM9413-4    ","GM9413-4     ","12V, 218.4:1 Gear Motor, 13 RPM     "," GM9413-4 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9413-4 GM9413-4 DC Brush Gearmotor 1.37 Diameter 218.4:1 ratio 175 oz-in Maximum Continuous Torque 973 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 13 rpm No load speed Torque Constant (Kt) = 5.6 oz-in / amp Voltage Constant (Ke) = 4.14 v/krpm Resistance (R) = 8.33 ohms Inductance = 6.17 mH Rated voltage: 12 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque 108.68 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[8]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9413-3.aspx","2008-08-14","9K","GM9413-3    ","GM9413-3     ","12V, 65.5:1 Gear Motor, 43 RPM     "," GM9413-3 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9413-3 GM9413-3 DC Brush Gearmotor 1.37 Diameter 65.5:1 ratio 136 oz-in Maximum Continuous Torque 326 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 43 rpm No load speed Torque Constant (Kt) = 5.6 oz-in / amp Voltage Constant (Ke) = 4.14 v/krpm Resistance (R) = 8.33 ohms Inductance = 6.17 mH Rated voltage: 12 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque 107.71 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[9]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9413-2.aspx","2008-08-14","9K","GM9413-2    ","GM9413-2     ","12V, 19.7:1 Gear Motor, 142 RPM     "," GM9413-2 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9413-2 GM9413-2 DC Brush Gearmotor 1.37 Diameter 19.7:1 ratio 45 oz-in Maximum Continuous Torque 109 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 142 rpm No load speed Torque Constant (Kt) = 5.6 oz-in / amp Voltage Constant (Ke) = 4.14 v/krpm Resistance (R) = 8.33 ohms Inductance = 6.17 mH Rated voltage: 12 volts Encoder: None Length: 4.32 106.75 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[10]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S027.aspx","2008-08-14","10K","GM9236S027    ","GM9236S027     ","24V, 65.5:1 Gear Motor w/Encoder, 71 RPM     "," GM9236S027 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S027 GM9236S027 DC Brush Gearmotor with encoder 1.37 Diameter 65.5:1 ratio 480 oz-in Maximum Continuous Torque 2585 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 71 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: 500 CPR Length: 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 255.94 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[11]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S025.aspx","2008-08-14","10K","GM9236S025    ","GM9236S025     ","12V, 65.5:1 Gear Motor w/Encoder, 71 RPM     "," GM9236S025 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S025 GM9236S025 DC Brush Gearmotor with encoder 1.37 Diameter 65.5:1 ratio 480 oz-in Maximum Continuous Torque 2585 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 71 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: 500 CPR Length: 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 255.79 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[12]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S024.aspx","2008-08-14","9K","GM9236S024    ","GM9236S024     ","12V, 65.5:1 Gear Motor, 71 RPM     "," GM9236S024 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S024 GM9236S024 DC Brush Gearmotor 1.37 Diameter 65.5:1 ratio 480 oz-in Maximum Continuous Torque 2585 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 71 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: None Length: 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 146.41 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[13]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S021.aspx","2008-08-14","10K","GM9236S021    ","GM9236S021     ","24V, 19.7:1 Gear Motor w/Encoder, 236 RPM     "," GM9236S021 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S021 GM9236S021 DC Brush Gearmotor with encoder 1.37 Diameter 19.7:1 ratio 153 oz-in Maximum Continuous Torque 860 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 236 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor with encoder) = 4.33 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 255.59 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[14]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S020.aspx","2008-08-14","10K","GM9236S020    ","GM9236S020     ","24V, 19.7:1 Gear Motor, 236 RPM     "," GM9236S020 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S020 GM9236S020 DC Brush Gearmotor with encoder 1.37 Diameter 19.7:1 ratio 153 oz-in Maximum Continuous Torque 860 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 236 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: None Length (motor with encoder) = 4.33 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 146.41 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[15]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S018.aspx","2008-08-14","9K","GM9236S018    ","GM9236S018     ","12V, 19.7:1 Gear Motor, 236 RPM     "," GM9236S018 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S018 GM9236S018 DC Brush Gearmotor 1.37 Diameter 19.7:1 ratio 153 oz-in Maximum Continuous Torque 860 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 236 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: None Length (motor) = 4.32 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 145.45 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[16]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S015.aspx","2008-08-14","10K","GM9236S015    ","GM9236S015     ","24V, 5.9:1 Gear Motor w/Encoder, 790 RPM     "," GM9236S015 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S015 GM9236S015 DC Brush Gearmotor with encoder 1.37 Diameter 5.9:1 ratio 48 oz-in Maximum Continuous Torque 286 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 790 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 4.32 Unit supplied with ball bearing output shaft 251.85 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[17]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S014.aspx","2008-08-14","10K","GM9236S014    ","GM9236S014     ","24V, 5.9:1 Gear Motor, 790 RPM     "," GM9236S014 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S014 GM9236S014 DC Brush Gearmotor 1.37 Diameter 5.9:1 ratio 48 oz-in Maximum Continuous Torque 286 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 790 rpm No load speed Torque Constant (Kt) = 6.49 oz-in / amp Voltage Constant (Ke) = 4.8 v/krpm Resistance (R) = 2.49 ohms Inductance = 2.63 mH Rated voltage: 24 volts Encoder: None Length (motor) = 4.32 Unit supplied with ball bearing output shaft 142.46 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[18]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S013.aspx","2008-08-14","9K","GM9236S013    ","GM9236S013     ","12V, 5.9:1 Gear Motor w/Encoder, 790 RPM     "," GM9236S013 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S013 GM9236S013 DC Brush Gearmotor with encoder 1.37 Diameter 5.9:1 ratio 48 oz-in Maximum Continuous Torque 286 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 790 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: 500 CPR Length (motor) = 4.32 Unit supplied with ball bearing output shaft 251.09 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[19]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9236S012.aspx","2008-08-14","9K","GM9236S012    ","GM9236S012     ","12V, 5.9:1 Gear Motor, 790 RPM     "," GM9236S012 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9236S012 GM9236S012 DC Brush Gearmotor 1.37 Diameter 5.9:1 ratio 48 oz-in Maximum Continuous Torque 286 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 790 rpm No load speed Torque Constant (Kt) = 3.25 oz-in / amp Voltage Constant (Ke) = 2.4 v/krpm Resistance (R) = 0.71 ohms Inductance = 0.66 mH Rated voltage: 12 volts Encoder: None Length (motor) = 4.32 Unit supplied with ball bearing output shaft 141.71 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[20]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S033.aspx","2008-08-14","10K","GM9234S033    ","GM9234S033     ","24V, 218.4:1 Gear Motor w/Encoder, 21 RPM     "," GM9234S033 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S033 GM9234S033 DC Brush Gearmotor 1.37 Diameter 218.4:1 ratio 500 oz-in Maximum Continuous Torque 4199 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 21 rpm No load speed Torque Constant (Kt) = 6.5 oz-in / amp Voltage Constant (Ke) = 4.81 v/krpm Resistance (R) = 4.62 ohms Inductance = 3.97 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 250.81 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[21]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S032.aspx","2008-08-14","9K","GM9234S032    ","GM9234S032     ","24V, 218.4:1 Gear Motor, 21 RPM     "," GM9234S032 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S032 GM9234S032 DC Brush Gearmotor 1.37 Diameter 218.4:1 ratio 500 oz-in Maximum Continuous Torque 4199 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 21 rpm No load speed Torque Constant (Kt) = 6.5 oz-in / amp Voltage Constant (Ke) = 4.81 v/krpm Resistance (R) = 4.62 ohms Inductance = 3.97 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 141.43 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[22]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S031.aspx","2008-08-14","10K","GM9234S031    ","GM9234S031     ","12V, 218.4:1 Gear Motor w/Encoder, 21 RPM     "," GM9234S031 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S031 GM9234S031 DC Brush Gearmotor 1.37 Diameter 218.4:1 ratio 500 oz-in Maximum Continuous Torque 4199 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 21 rpm No load speed Torque Constant (Kt) = 3.29 oz-in / amp Voltage Constant (Ke) = 2.43 v/krpm Resistance (R) = 1.26 ohms Inductance = 1.02 mH Rated voltage: 12 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 249.99 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[23]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S030.aspx","2008-08-14","9K","GM9234S030    ","GM9234S030     ","12V, 218.4:1 Gear Motor, 21 RPM     "," GM9234S030 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S030 GM9234S030 DC Brush Gearmotor 1.37 Diameter 218.4:1 ratio 500 oz-in Maximum Continuous Torque 4199 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 21 rpm No load speed Torque Constant (Kt) = 3.29 oz-in / amp Voltage Constant (Ke) = 2.43 v/krpm Resistance (R) = 1.26 ohms Inductance = 1.02 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 140.61 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[24]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S029.aspx","2008-08-14","9K","GM9234S029    ","GM9234S029     ","24V, 127.8:1 Gear Motor, 36 RPM     "," GM9234S029 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S029 GM9234S029 DC Brush Gearmotor 1.37 Diameter 127.8:1 ratio 500 oz-in Maximum Continuous Torque 2747 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 36 rpm No load speed Torque Constant (Kt) = 6.5 oz-in / amp Voltage Constant (Ke) = 4.81 v/krpm Resistance (R) = 4.62 ohms Inductance = 3.97 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 140.45 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[25]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S028.aspx","2008-08-14","9K","GM9234S028    ","GM9234S028     ","12V, 127.8:1 Gear Motor, 36 RPM     "," GM9234S028 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S028 GM9234S028 DC Brush Gearmotor 1.37 Diameter 127.8:1 ratio 500 oz-in Maximum Continuous Torque 2747 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 36 rpm No load speed Torque Constant (Kt) = 3.29 oz-in / amp Voltage Constant (Ke) = 2.43 v/krpm Resistance (R) = 1.26 ohms Inductance = 1.02 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 139.63 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[26]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S023.aspx","2008-08-14","9K","GM9234S023    ","GM9234S023     ","24V, 38.3:1 Gear Motor, 127 RPM     "," GM9234S023 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S023 GM9234S023 DC Brush Gearmotor 1.37 Diameter 38.3:1 ratio 187 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 127 rpm No load speed Torque Constant (Kt) = 6.5 oz-in / amp Voltage Constant (Ke) = 4.81 v/krpm Resistance (R) = 4.62 ohms Inductance = 3.97 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 139.50 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[27]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S022.aspx","2008-08-14","10K","GM9234S022    ","GM9234S022     ","12V, 38.3:1 Gear Motor, 127 RPM     "," GM9234S022 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S022 GM9234S022 DC Brush Gearmotor 1.37 Diameter 38.3:1 ratio 187 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 127 rpm No load speed Torque Constant (Kt) = 3.29 oz-in / amp Voltage Constant (Ke) = 2.43 v/krpm Resistance (R) = 1.26 ohms Inductance = 1.02 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 138.68 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[28]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S017.aspx","2008-08-14","10K","GM9234S017    ","GM9234S017     ","24V, 11.5:1 Gear Motor, 424 RPM     "," GM9234S017 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S017 GM9234S017 DC Brush Gearmotor 1.37 Diameter 11.5:1 ratio 61 oz-in Maximum Continuous Torque 304 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 424 rpm No load speed Torque Constant (Kt) = 6.5 oz-in / amp Voltage Constant (Ke) = 4.81 v/krpm Resistance (R) = 4.62 ohms Inductance = 3.97 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 135.75 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[29]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000/GM9234S016.aspx","2008-08-14","9K","GM9234S016    ","GM9234S016     ","12V, 11.5:1 Gear Motor, 424 RPM     "," GM9234S016 View Cart Products >>GM9000 Series Brush Commutated DC Gearmotors >>GM9234S016 GM9234S016 DC Brush Gearmotor 1.37 Diameter 11.5:1 ratio 61 oz-in Maximum Continuous Torque 304 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 424 rpm No load speed Torque Constant (Kt) = 3.29 oz-in / amp Voltage Constant (Ke) = 2.43 v/krpm Resistance (R) = 1.26 ohms Inductance = 1.02 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 134.94 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[30]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S029.aspx","2008-08-14","10K","GM8724S029    ","GM8724S029     ","24V, 187.7:1 Gear Motor w/Encoder, 24 RPM     "," GM8724S029 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S029 GM8724S029 DC Brush Gearmotor 1.37 Diameter 187.7:1 ratio 175 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 24 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 266.67 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[31]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S028.aspx","2008-08-14","9K","GM8724S028    ","GM8724S028     ","24V, 187.7:1 Gear Motor, 24 RPM     "," GM8724S028 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S028 GM8724S028 DC Brush Gearmotor 1.37 Diameter 187.7:1 ratio 175 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 24 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 157.29 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[32]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S027.aspx","2008-08-14","10K","GM8724S027    ","GM8724S027     ","12V, 187.7:1 Gear Motor w/Encoder, 24 RPM     "," GM8724S027 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S027 GM8724S027 DC Brush Gearmotor 1.37 Diameter 187.7:1 ratio 175 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 24 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 265.58 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[33]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S026.aspx","2008-08-14","9K","GM8724S026    ","GM8724S026     ","12V, 187.7:1 Gear Motor, 24 RPM     "," GM8724S026 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S026 GM8724S026 DC Brush Gearmotor 1.37 Diameter 187.7:1 ratio 175 oz-in Maximum Continuous Torque 911 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 24 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 156.20 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[34]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S025.aspx","2008-08-14","9K","GM8724S025    ","GM8724S025     ","24V, 95.9:1 Gear Motor, 47 RPM     "," GM8724S025 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S025 GM8724S025 DC Brush Gearmotor 1.37 Diameter 95.9:1 ratio 173 oz-in Maximum Continuous Torque 466 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 47 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 157.29 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[35]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S024.aspx","2008-08-14","10K","GM8724S024    ","GM8724S024     ","12V, 95.9:1 Gear Motor, 47 RPM     "," GM8724S024 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S024 GM8724S024 DC Brush Gearmotor 1.37 Diameter 95.9:1 ratio 173 oz-in Maximum Continuous Torque 466 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 47 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 156.20 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[36]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S023.aspx","2008-08-14","10K","GM8724S023    ","GM8724S023     ","24V, 60.5:1 Gear Motor w/Encoder, 75 RPM     "," GM8724S023 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S023 GM8724S023 DC Brush Gearmotor 1.37 Diameter 60.5:1 ratio 113 oz-in Maximum Continuous Torque 328 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 75 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft 265.72 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[37]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S022.aspx","2008-08-14","9K","GM8724S022    ","GM8724S022     ","24V, 60.5:1 Gear Motor, 75 RPM     "," GM8724S022 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S022 GM8724S022 DC Brush Gearmotor 1.37 Diameter 60.5:1 ratio 113 oz-in Maximum Continuous Torque 328 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 75 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 156.34 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[38]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S021.aspx","2008-08-14","10K","GM8724S021    ","GM8724S021     ","12V, 60.5:1 Gear Motor w/Encoder, 75 RPM     "," GM8724S021 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S021 GM8724S021 DC Brush Gearmotor 1.37 Diameter 60.5:1 ratio 113 oz-in Maximum Continuous Torque 328 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 75 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: 500 CPR Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 264.63 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[39]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S020.aspx","2008-08-14","10K","GM8724S020    ","GM8724S020     ","12V, 60.5:1 Gear Motor, 75 RPM     "," GM8724S020 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S020 GM8724S020 DC Brush Gearmotor 1.37 Diameter 60.5:1 ratio 113 oz-in Maximum Continuous Torque 328 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 75 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft. 155.25 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[40]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S019.aspx","2008-08-14","9K","GM8724S019    ","GM8724S019     ","24V, 30.9:1 Gear Motor, 146 RPM     "," GM8724S019 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S019 GM8724S019 DC Brush Gearmotor 1.37 Diameter 30.9:1 ratio 61 oz-in Maximum Continuous Torque 168 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 146 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 156.34 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[41]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S018.aspx","2008-08-14","9K","GM8724S018    ","GM8724S018     ","12V, 30.9:1 Gear Motor, 146 RPM     "," GM8724S018 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S018 GM8724S018 DC Brush Gearmotor 1.37 Diameter 30.9:1 ratio 61 oz-in Maximum Continuous Torque 168 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 146 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 155.25 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[42]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S017.aspx","2008-08-14","9K","GM8724S017    ","GM8724S017     ","24V, 19.5:1 Gear Motor w/Encoder, 230 RPM     "," GM8724S017 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S017 GM8724S017 DC Brush Gearmotor 1.37 Diameter 19.5:1 ratio 41.5 oz-in Maximum Continuous Torque 117 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 230 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 3.67 Unit supplied with ball bearing output shaft 268.96 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[43]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S016.aspx","2008-08-14","9K","GM8724S016    ","GM8724S016     ","24V, 19.5:1 Gear Motor, 230 RPM     "," GM8724S016 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S016 GM8724S016 DC Brush Gearmotor 1.37 Diameter 19.5:1 ratio 41.5 oz-in Maximum Continuous Torque 117 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 230 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 155.40 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[44]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S015.aspx","2008-08-14","10K","GM8724S015    ","GM8724S015     ","12V, 19.5:1 Gear Motor w/Encoder, 230 RPM     "," GM8724S015 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S015 GM8724S015 DC Brush Gearmotor 1.37 Diameter 19.5:1 ratio 41.5 oz-in Maximum Continuous Torque 117 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 230 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: 500 CPR Length (motor) = 3.67 Unit supplied with ball bearing output shaft 263.69 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[45]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S014.aspx","2008-08-14","9K","GM8724S014    ","GM8724S014     ","12V, 19.5:1 Gear Motor, 230 RPM     "," GM8724S014 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S014 GM8724S014 DC Brush Gearmotor 1.37 Diameter 19.5:1 ratio 41.5 oz-in Maximum Continuous Torque 117 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 230 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 154.30 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[46]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S013.aspx","2008-08-14","9K","GM8724S013    ","GM8724S013     ","24V, 9.9:1 Gear Motor, 455 RPM     "," GM8724S013 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S013 GM8724S013 DC Brush Gearmotor 1.37 Diameter 9.9:1 ratio 21 oz-in Maximum Continuous Torque 60 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 455 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 155.20 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[47]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S012.aspx","2008-08-14","9K","GM8724S012    ","GM8724S012     ","12V, 9.9:1 Gear Motor, 455 RPM     "," GM8724S012 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S012 GM8724S012 DC Brush Gearmotor 1.37 Diameter 9.9:1 ratio 21 oz-in Maximum Continuous Torque 60 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 455 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 154.30 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[48]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S011.aspx","2008-08-14","9K","GM8724S011    ","GM8724S011     ","24V, 6.3:1 Gear Motor w/Encoder, 720 RPM     "," GM8724S011 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S011 GM8724S011 DC Brush Gearmotor 1.37 Diameter 6.3:1 ratio 14.5 oz-in Maximum Continuous Torque 42 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 720 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: 500 CPR Length (motor) = 3.67 Unit supplied with ball bearing output shaft 235.77 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[49]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S010.aspx","2008-08-14","10K","GM8724S010    ","GM8724S010     ","24V, 6.3:1 Gear Motor, 720 RPM     "," GM8724S010 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S010 GM8724S010 DC Brush Gearmotor 1.37 Diameter 6.3:1 ratio 14.5 oz-in Maximum Continuous Torque 42 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 720 rpm No load speed Torque Constant (Kt) = 6.18 oz-in / amp Voltage Constant (Ke) = 4.57 v/krpm Resistance (R) = 17 ohms Inductance = 9.35 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 126.38 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[50]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S009.aspx","2008-08-14","9K","GM8724S009    ","GM8724S009     ","12V, 6.3:1 Gear Motor w/Encoder, 720 RPM     "," GM8724S009 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S009 GM8724S009 DC Brush Gearmotor 1.37 Diameter 6.3:1 ratio 14.5 oz-in Maximum Continuous Torque 42 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 720 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 234.67 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[51]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8724S008.aspx","2008-08-14","9K","GM8724S008    ","GM8724S008     ","12V, 6.3:1 Gear Motor, 720 RPM     "," GM8724S008 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8724S008 GM8724S008 DC Brush Gearmotor 1.37 Diameter 6.3:1 ratio 14.5 oz-in Maximum Continuous Torque 42 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 720 rpm No load speed Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 v/krpm Resistance (R) = 4.33 ohms Inductance = 2.34 mH Rated voltage: 12 volts Encoder: None Length (motor) = 3.67 Unit supplied with ball bearing output shaft 125.29 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[52]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8712S030.aspx","2008-08-14","9K","GM8712S030    ","GM8712S030     ","24V, 187:1 Gear Motor w/Encoder, 41 RPM     "," GM8712S030 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8712S030 GM8712S030 DC Brush Gearmotor 1.37 Diameter 187.0:1 ratio 100 oz-in Maximum Continuous Torque 557 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 41 rpm No load speed Torque Constant (Kt) = 3.87 oz-in / amp Voltage Constant (Ke) = 2.86 v/krpm Resistance (R) = 17.2 ohms Inductance = 8.62 mH Rated voltage: 24 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. 106.75 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[53]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8712-41.aspx","2008-08-14","9K","GM8712-41    ","GM8712-41     ","19.1V, 187:1 Gear Motor, 41 RPM     "," GM8712-41 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8712-41 GM8712-41 DC Brush Gearmotor 1.37 Diameter 187.0:1 ratio 100 oz-in Maximum Continuous Torque 557 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 41 rpm No load speed Torque Constant (Kt) = 3.06 oz-in / amp Voltage Constant (Ke) = 2.27 v/krpm Resistance (R) = 10.8 ohms Inductance = 5.4 mH Rated voltage: 19.1 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. 106.46 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[54]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8712-31.aspx","2008-08-14","9K","GM8712-31    ","GM8712-31     ","19.1V, 60.5:1 Gear Motor, 128 RPM     "," GM8712-31 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8712-31 GM8712-31 DC Brush Gearmotor 1.37 Diameter 60.5:1 ratio 46 oz-in Maximum Continuous Torque 201 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 128 rpm No load speed Torque Constant (Kt) = 3.06 oz-in / amp Voltage Constant (Ke) = 2.27 v/krpm Resistance (R) = 10.8 ohms Inductance = 5.4 mH Rated voltage: 19.1 volts Encoder: None Length (motor) = 3.67 The gearhead will be damaged when operating at the Peak Torque. 105.50 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[55]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8712-21.aspx","2008-08-14","9K","GM8712-21    ","GM8712-21     ","19.1V, 19.5:1 Gear Motor, 396 RPM     "," GM8712-21 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8712-21 GM8712-21 DC Brush Gearmotor 1.37 Diameter 19.5:1 ratio 16 oz-in Maximum Continuous Torque 72 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 396 rpm No load speed Torque Constant (Kt) = 3.06 oz-in / amp Voltage Constant (Ke) = 2.27 v/krpm Resistance (R) = 10.8 ohms Inductance = 5.4 mH Rated voltage: 19.1 volts Encoder: None Length (motor) = 3.67 104.56 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[56]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000/GM8712-11.aspx","2008-08-14","9K","GM8712-11    ","GM8712-11     ","19.1V, 6.3:1 Gear Motor, 1227 RPM     "," GM8712-11 View Cart Products >>GM8000 Series Brush Commutated DC Gearmotors >>GM8712-11 GM8712-11 DC Brush Gearmotor 1.37 Diameter 6.3:1 ratio 6 oz-in Maximum Continuous Torque 26 oz-in Peak Torque (Note: Peak torque is provided for the purpose of performance calculations only. Operation near, or at, a stalled condition will result in motor and/or gearhead damage). 1227 rpm No load speed Torque Constant (Kt) = 3.06 oz-in / amp Voltage Constant (Ke) = 2.27 v/krpm Resistance (R) = 10.8 ohms Inductance = 5.4 mH Rated voltage: 19.1 volts Encoder: None Length (motor) = 3.67 103.58 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[57]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S016.aspx","2008-08-14","10K","GM14904S016    ","GM14904S016     ","24V, 19.7:1 Gear Motor w/Encoder, 179 RPM     "," GM14904S016 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S016 GM14904S016 DC Brush Gearmotor with enocder 1.37 Diameter 19.7:1 ratio 374 oz-in Maximum Continuous Torque 2934 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 179 rpm no load speed Torque Constant (Kt) = 8.67 oz-in / amp Voltage Costant (Ke) = 6.41 v/krpm Resistance (R) = 1.01 ohms Inductance = 1.6 mH Rated Voltage = 24 volts Encoder: 500 CPR Length (motor & encoder)= 6.1 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 345.06 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[58]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S015.aspx","2008-08-14","10K","GM14904S015    ","GM14904S015     ","24V, 19.7:1 Gear Motor, 179 RPM     "," GM14904S015 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S015 GM14904S015 DC Brush Gearmotor 1.37 Diameter 19.7:1 ratio 374 oz-in Maximum Continuous Torque 2934 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 179 rpm no load speed Torque Constant (Kt) = 8.67 oz-in / amp Voltage Costant (Ke) = 6.41 v/krpm Resistance (R) = 1.01 ohms Inductance = 1.6 mH Rated Voltage = 24 volts Encoder: None Length (motor)= 5.44 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 235.68 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[59]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S014.aspx","2008-08-14","10K","GM14904S014    ","GM14904S014     ","12V, 19.7:1 Gear Motor w/Encoder, 179 RPM     "," GM14904S014 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S014 GM14904S014 DC Brush Gearmotor with encoder 1.37 Diameter 19.7:1 ratio 374 oz-in Maximum Continuous Torque 2934 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 179 rpm no load speed Torque Constant (Kt) = 4.33 oz-in / amp Voltage Costant (Ke) = 3.21 v/krpm Resistance (R) = 0.27 ohms Inductance = 0.4 mH Rated Voltage = 12 volts Encoder: 500 CPR Length (motor)= The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft 344.31 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[60]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S013.aspx","2008-08-14","10K","GM14904S013    ","GM14904S013     ","12V, 19.7:1 Gear Motor, 179 RPM     "," GM14904S013 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S013 GM14904S013 DC Brush Gearmotor 1.37 Diameter 19.7:1 ratio 374 oz-in Maximum Continuous Torque 2934 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 179 rpm no load speed Torque Constant (Kt) = 4.33 oz-in / amp Voltage Costant (Ke) = 3.21 v/krpm Resistance (R) = 0.27 ohms Inductance = 0.4 mH Rated Voltage = 12 volts Encoder: None Length (motor)= 5.44 The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 243.93 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[61]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S012.aspx","2008-08-14","9K","GM14904S012    ","GM14904S012     ","24V, 5.9:1 Gear Motor w/Encoder, 597 RPM     "," GM14904S012 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S012 GM14904S012 DC Brush Gearmotor with encoder 1.37 Diameter 5.9:1 ratio 124 oz-in Maximum Continuous Torque 975 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 597 rpm no load speed Torque Constant (Kt) = 8.67 oz-in / amp Voltage Costant (Ke) = 6.41 v/krpm Resistance (R) = 1.01 ohms Inductance = 1.6 mH Rated Voltage = 24 volts Encoder: 500 CPR Length (motor)= The gearhead will be damaged when operating at the Peak Torque. Unit supplied with ball bearing output shaft 341.32 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[62]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S011.aspx","2008-08-14","10K","GM14904S011    ","GM14904S011     ","24V, 5.9:1 Gear Motor, 597 RPM     "," GM14904S011 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S011 GM14904S011 DC Brush Gearmotor 1.37 Diameter 5.9:1 ratio 124 oz-in Maximum Continuous Torque 975 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 597 rpm no load speed Torque Constant (Kt) = 8.67 oz-in / amp Voltage Costant (Ke) = 6.41 v/krpm Resistance (R) = 1.01 ohms Inductance = 1.6 mH Rated Voltage = 24 volts Encoder: None Length (motor)= The gearhead will be damaged when operating at the Peak Torque Unit supplied with ball bearing output shaft 231.94 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[63]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S010.aspx","2008-08-14","9K","GM14904S010    ","GM14904S010     ","12V, 5.9:1 Gear Motor w/Encoder, 597 RPM     "," GM14904S010 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GGM14904S010 GM14904S010 DC Brush Gearmotor with encoder 1.37 Diameter 5.9:1 ratio 124 oz-in Maximum Continuous Torque 975 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 597 rpm no load speed Torque Constant (Kt) = 4.33 oz-in / amp Voltage Costant (Ke) = 3.21 v/krpm Resistance (R) = 0.27 ohms Inductance = 0.4 mH Rated Voltage = 12 volts Encoder: 500 CPR Length (motor & encoder)= 6.1 The gearhead will be damaged when operating at the Peak Torque. 340.57 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[64]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14904S009.aspx","2008-08-14","9K","GM14904S009    ","GM14904S009     ","12V, 5.9:1 Gear Motor, 597 RPM     "," GM14904S009 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14904S009 GM14904S009 DC Brush Gearmotor 1.37 Diameter 5.9:1 ratio 124 oz-in Maximum Continuous Torque 975 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 597 rpm no load speed Torque Constant (Kt) = 4.33 oz-in / amp Voltage Costant (Ke) = 3.21 v/krpm Resistance (R) = 0.27 ohms Inductance = 0.4 mH Rated Voltage = 12 volts Encoder: None Length (motor)= 5.5 The gearhead will be damaged when operating at the Peak Torque. 231.19 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[65]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14902S020.aspx","2008-08-14","9K","GM14902S020    ","GM14902S020     ","24V, 65.5:1 Gear Motor w/Encoder, 59 RPM     "," GM14902S020 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14902S020 GM14902S020 DC Brush Gearmotor with encoder 1.37 Diameter 65.5:1 ratio 500 oz-in Maximum Continuous Torque 4625 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage 59 rpm no load speed Torque Constant (Kt) = 7.8 oz-in / amp Voltage Costant (Ke) = 5.77 v/krpm Resistance (R) = 1.73 ohms Inductance = 2.54 mH Rated Voltage = 24 volts Encoder: 500 CPR Length (motor & encoder)= 5.2 The gearhead will be damaged when operating at the Peak Torque. 335.87 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[66]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14902S019.aspx","2008-08-14","9K","GM14902S019    ","GM14902S019     ","24V, 65.5:1 Gear Motor, 59 RPM     "," GM14902S019 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14902S019 GM14902S019 DC Brush Gearmotor 1.37 Diameter 65.5:1 ratio 500 oz-in Maximum Continuous Torque 4625 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 59 rpm no load speed Torque Constant (Kt) = 7.8 oz-in / amp Voltage Costant (Ke) = 5.77 v/krpm Resistance (R) = 1.73 ohms Inductance = 2.54 mH Rated Voltage = 24 volts Encoder: None Length (motor)= 4.6 The gearhead will be damaged when operating at the Peak Torque. 226.49 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[67]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14902S018.aspx","2008-08-14","9K","GM14902S018    ","GM14902S018     ","12V, 65.5:1 Gear Motor w/Encoder, 59 RPM     "," GM14902S018 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14902S018 GM14902S018 DC Brush Gearmotor with encoder 1.37 Diameter 65.5:1 ratio 500 oz-in Maximum Continuous Torque 4625 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 59 rpm no load speed Torque Constant (Kt) = 3.9 oz-in / amp Voltage Costant (Ke) = 2.88 v/krpm Resistance (R) = 0.45 ohms Inductance = 0.63 mH Rated Voltage = 12 volts Encoder: 500 CPR Length (motor & encoder) = 5.20 The gearhead will be damaged when operating at the Torque Peak 335.12 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[68]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000/GM14604S002.aspx","2008-08-14","9K","GM14604S002    ","GM14604S002     ","24V, 75.1:1 Gear Motor, 49 RPM     "," GM14604S002 View Cart Products >>GM14000 Series Brush Commutated DC Gearmotors >>GM14604S002 GM14604S002 DC Brush Gearmotor 1.37 Diameter 75.0:1 ratio 1125 oz-in Maximum Continuous Torque 7803 oz-in Peak Torque (Note: Peak Torque is provided for the performance calculations only. Operation near,or at, a stalled condition will result in motor and/or gearhead damage. 49 rpm no load speed Torque Constant (Kt) = 8.67 oz-in / amp Voltage Costant (Ke) = 6.41 v/krpm Resistance (R) = 1.01 ohms Inductance = 1.6 mH Rated Voltage = 24 volts Encoder: None 412.99 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[69]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2342S004-R1.aspx","2008-08-14","9K","N2342S004-R1    ","N2342S004-R1     ","24V, NEMA 23 w/Encoder     "," N2342S004-R1 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2342S004-R1 N2342S004-R1 Nema 23 slotted DC Motor with 1000 ppr encoder (A,B,I) 27 oz-in Continuous torque 70 oz-in Peak (Stall) torque Torque constant (Kt) = 4.84 oz-in/amp Voltage constant (Ke) = 3.58 v/krpm Resistance = 0.60 ohms Inductance = 1.24 mH Length (Motor with encoderonly)= 2.68 405.59 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[70]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2342S003-R1.aspx","2008-08-14","9K","N2342S003-R1    ","N2342S003-R1     ","12V, NEMA 23 w/Encoder     "," N2342S003-R1 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2342S003-R1 N2342S003-R1 Nema 23 slotted DC Motor with 1000 ppr encoder (A,B,I) 27 oz-in Continuous torque 70 oz-in Peak (Stall) torque Torque constant (Kt) = 2.42 oz-in/amp Voltage constant (Ke) = 1.79 v/krpm Resistance = 0.15 ohms Inductance = 0.31 mH Length (Motor with encoder)= 2.68 405.59 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[71]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2341S002-R1.aspx","2008-08-14","9K","N2341S002-R1    ","N2341S002-R1     ","24V, NEMA 23 w/Encoder     "," N2341S002-R1 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2341S002-R1 N2341S002-R1 Nema 23 slotted DC Motor with 1000 ppr encoder (A,B,I) 16 oz-in Continuous torque 32 oz-in Peak (Stall) torque Torque constant (Kt) = 4.32 oz-in/amp Voltage constant (Ke) = 3.20 v/krpm Resistance = 1.05 ohms Inductance = 1.95 mH Length (Motor with encoder)= 2.2 381.75 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[72]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2341S001-R1.aspx","2008-08-14","9K","N2341S001-R1    ","N2341S001-R1     ","12V, NEMA 23 w/Encoder     "," N2341S001-R1 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2341S001-R1 N2341S001-R1 Nema 23 slotted DC Motor with encoder (1000 ppr, A,B,I) 16 oz-in Continuous torque 32 oz-in Peak (Stall) torque Torque constant (Kt) = 2.16 oz-in/amp Voltage constant (Ke) = 1.60 v/krpm Resistance = 0.26 ohms Inductance = 0.49 mH Length (Motor with encoder)= 2.2 381.75 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[73]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2312S021.aspx","2008-08-14","9K","N2312S021    ","N2312S021     ","24V, NEMA 23 DC Motor     "," N2312S021 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2312S021 N2312S021 Nema 23 slotted DC Motor 27 oz-in Continuous torque 70 oz-in Peak (Stall) torque Torque constant (Kt) = 2.42 oz-in/amp Voltage constant (Ke) = 1.79 v/krpm Resistance = 0.15 ohms Inductance = 0.31 mH Length (Motor only)= 1.98 255.41 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[74]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2312S019.aspx","2008-08-14","9K","N2312S019    ","N2312S019     ","12V, NEMA 23 DC Motor     "," N2312S019 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2312S019 N2312S019 Nema 23 slotted DC Motor 27 oz-in Continuous torque 70 oz-in Peak (Stall) torque Torque constant (Kt) = 4.84 oz-in/amp Voltage constant (Ke) = 3.58 v/krpm Resistance = 0.60 ohms Inductance = 1.24 mH Length (Motor only)= 1.98 255.41 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[75]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2311S020.aspx","2008-08-14","9K","N2311S020    ","N2311S020     ","24V, NEMA 23 DC Motor     "," N2311S020 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2311S020 N2311S020 Nema 23 slotted DC Motor 16 oz-in Continuous torque 32 oz-in Peak (Stall) torque Torque constant (Kt) = 2.16 oz-in/amp Voltage constant (Ke) = 1.60 v/krpm Resistance = 0.26 ohms Inductance = 0.49 mH Length (Motor only)= 1.53 231.57 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[76]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/EST/N2311S018.aspx","2008-08-14","9K","N2311S018    ","N2311S018     ","12V, NEMA 23 DC Motor     "," N2311S018 View Cart Products >>ST Series Slotted Brushless DC Servo Motors >>N2311S018 N2311S018 Nema 23 slotted DC Motor 16 oz-in Continuous torque 32 oz-in Peak (Stall) torque Torque constant (Kt) = 4.32 oz-in/amp Voltage constant (Ke) = 3.20 v/krpm Resistance = 1.05 ohms Inductance = 1.95 mH Length (Motor only)= 1.53 231.57 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[77]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/5441S006.aspx","2008-08-14","9K","5441S006    ","5441S006     ","24V DC w/ 500 CPR Encoder     "," 5441S006 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>5441S006 5441S006 Slotless DC Motor with encoder 2.283 Square 25 oz-in Continuous torque 171 oz-in Peak (Stall) torque Torque constant (Kt) = 6.46 oz-in/amp Voltage constant (Ke) = 4.77 v/krpm Resistance = 0.88 ohms Inductance = 0.27 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.6 322.13 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[78]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/5441S005.aspx","2008-08-14","10K","5441S005    ","5441S005     ","12V DC w/ 500 CPR Encoder     "," 5441S005 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>5441S005 5441S005 Slotless DC Motor with encoder 2.283 Square 25 oz-in Continuous torque 171 oz-in Peak (Stall) torque Torque constant (Kt) = 2.96 oz-in/amp Voltage constant (Ke) = 2.19 v/krpm Resistance = 0.25 ohms Inductance = 0.06 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.6 322.13 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[79]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4443S014.aspx","2008-08-14","10K","4443S014    ","4443S014     ","48V DC w/ 500 CPR Encoder     "," 4443S014 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4443S014 4443S014 Slotless DC Motor with encoder 1.65 Square 19.1 oz-in Continuous torque 149 oz-in Peak (Stall) torque Torque constant (Kt) = 11.1 oz-in/amp Voltage constant (Ke) = 8.21 v/krpm Resistance = 3.58 ohms Inductance = 0.74 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.7 297.39 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[80]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4443S013.aspx","2008-08-14","10K","4443S013    ","4443S013     ","24V DC w/ 500 CPR Encoder     "," 4443S013 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4443S013 4443S013 Slotless DC Motor with encoder 1.65 Square 19.1 oz-in Continuous torque 149 oz-in Peak (Stall) torque Torque constant (Kt) = 5.55 oz-in/amp Voltage constant (Ke) = 4.1 v/krpm Resistance = 0.89 ohms Inductance = 0.19 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.7 297.39 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[81]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4442S012.aspx","2008-08-14","10K","4442S012    ","4442S012     ","38.2V DC w/ 500 CPR Encoder     "," 4442S012 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4442S012 4442S012 Slotless DC Motor with encoder 1.65 Square 14.3 oz-in Continuous torque 100.2 oz-in Peak (Stall) torque Torque constant (Kt) = 8.67 oz-in/amp Voltage constant (Ke) = 6.41 v/krpm Resistance = 3.3 ohms Inductance = 0.64 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.4 281.65 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[82]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4442S011.aspx","2008-08-14","10K","4442S011    ","4442S011     ","19.1V DC w/ 500 CPR Encoder     "," 4442S011 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4442S011 4442S011 Slotless DC Motor with encoder 1.65 Square 14.3 oz-in Continuous torque 100.2 oz-in Peak (Stall) torque Torque constant (Kt) = 4.33 oz-in/amp Voltage constant (Ke) = 3.2 v/krpm Resistance = 0.82 ohms Inductance = 0.16 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.4 281.65 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[83]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4441S010.aspx","2008-08-14","10K","4441S010    ","4441S010     ","30.3V DC w/ 500 CPR Encoder     "," 4441S010 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4441S010 4441S010 Slotless DC Motor with encoder 1.65 Square 11.9 oz-in Continuous torque 71.2 oz-in Peak (Stall) torque Torque constant (Kt) = 7.05 oz-in/amp Voltage constant (Ke) = 5.21 v/krpm Resistance = 3 ohms Inductance = 0.54 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.1 269.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[84]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/4441S009.aspx","2008-08-14","10K","4441S009    ","4441S009     ","15.1V DC w/ 500 CPR Encoder     "," 4441S009 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>4441S009 4441S009 Slotless DC Motor with encoder 1.65 Square 11.9 oz-in Continuous torque 71.2 oz-in Peak (Stall) torque Torque constant (Kt) = 3.53 oz-in/amp Voltage constant (Ke) = 2.61 v/krpm Resistance = 0.75 ohms Inductance = 0.14 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.1 269.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[85]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/3442S004-R3.aspx","2008-08-14","10K","3442S004-R3    ","3442S004-R3     ","38.2V DC w/ 500 CPR Encoder     "," 3442S004-R3 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>3442S004-R3 3442S004-R3 Slotless DC Motor with encoder Slotless DC Motor with encoder 1.38 Square 5.78 oz-in Continuous torque 26.2 oz-in Peak (Stall) torque Torque constant (Kt) = 6.88 oz-in/amp Voltage constant (Ke) = 5.09 v/krpm Resistance = 9.32 ohms Inductance = 1.16 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.16 264.48 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[86]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/3442S003-R3.aspx","2008-08-14","10K","3442S003-R3    ","3442S003-R3     ","19.1V DC w/ 500 CPR Encoder     "," 3442S003-R3 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>3442S003-R3 3442S003-R3 Slotless DC Motor with encoder 1.38 Square 5.78 oz-in Continuous torque 26.2 oz-in Peak (Stall) torque Torque constant (Kt) = 3.44 oz-in/amp Voltage constant (Ke) = 2.54 v/krpm Resistance = 2.67 ohms Inductance = 0.29 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 2.16 264.48 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[87]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/3441S002-R3.aspx","2008-08-14","10K","3441S002-R3    ","3441S002-R3     ","24V DC w/ 500 CPR Encoder     "," 3441S002-R3 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>3441S002-R3 3441S002-R3 Slotless DC Motor with encoder 1.38 Square 4.11 oz-in Continuous torque 13.3 oz-in Peak (Stall) torque Torque constant (Kt) = 4.47 oz-in/amp Voltage constant (Ke) = 3.31 v/krpm Resistance = 7.9 ohms Inductance = 0.7 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 1.76 249.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[88]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ESL/3441S001-R3.aspx","2008-08-14","9K","3441S001-R3    ","3441S001-R3     ","12V DC w/ 500 CPR Encoder     "," 3441S001-R3 View Cart Products >>SL Series Slotted Brushless DC Servo Motors >>3441S001-R3 3441S001-R3 Slotless DC Motor with encoder 1.38 Square 4.11 oz-in Continuous torque 13.3 oz-in Peak (Stall) torque Torque constant (Kt) = 4.47 oz-in/amp Voltage constant (Ke) = 3.31 v/krpm Resistance = 7.9 ohms Inductance = 0.7 mH Encoder: 500 ppr, 3-channel (A,B,I) Length (Motor with encoder)= 1.76 249.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[89]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9237S011.aspx","2008-08-14","9K","9237S011    ","9237S011     ","24V, 1.58 Diameter Motor w/ 500 CPR Encoder, 5331 RPM     "," 9237S011 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9237S011 9237S011 Motor with 500 ppr, 3 channel (A,B,I) encoderRated voltage: 24 VDC 11.5 oz-in continuous torque 77 oz-in peak torque No load speed 5,331 rpm Torque Constant (Kt) = 6 oz-in / amp Voltage Constant (Ke) = 4.44 volts / krpm Resistance (R) = 1.85 ohms Inductance (I) = 1.97 mh Length (motor only) = 4.1 221.56 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[90]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9237S010.aspx","2008-08-14","9K","9237S010    ","9237S010     ","24V, DC Motor, 1.58 Diameter, 5331 RPM     "," 9237S010 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9237S010 9237S010 Motor only Rated voltage: 24 VDC 11.5 oz-in continuous torque 77 oz-in peak torque No load speed 5,331 rpm Torque Constant (Kt) = 6 oz-in / amp Voltage Constant (Ke) = 4.44 volts / krpm Resistance (R) = 1.85 ohms Inductance (I) = 1.97 mh Length (motor only) = 3.4 112.18 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[91]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9236S009.aspx","2008-08-14","9K","9236S009    ","9236S009     ","24V, 1.58 Diameter Motor w/ 500 CPR Encoder, 4913 RPM     "," 9236S009 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9236S009 9236S009 Motor with 500 ppr, 3 channel (A,B,I) encoderRated voltage: 24 VDC 9.5 oz-in continuous torque 61.8 oz-in peak torque No load speed 4,913 rpm Torque constant (Kt) = 6.49 oz-in / amp Voltage constant (Ke) = 4.8 volts / krpm Resistance (R) = 2.49 ohms Inductance (I) = 2.63 mh Length (motor only) = 3.8 204.18 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[92]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9236S008.aspx","2008-08-14","9K","9236S008    ","9236S008     ","24V, DC Motor, 1.58 Diameter, 4913 RPM     "," 9236S008 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9236S008 9236S008 Motor only Rated voltage: 24 VDC 9.5 oz-in continuous torque 61.8 oz-in peak torque No load speed 4,913 rpm Torque constant (Kt) = 6.49 oz-in / amp Voltage constant (Ke) = 4.8 volts / krpm Resistance (R) = 2.49 ohms Inductance (I) = 2.63 mh Length (motor only) = 3.1 94.80 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[93]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9234S007.aspx","2008-08-14","9K","9234S007    ","9234S007     ","24V, 1.58 Diameter Motor w/ 500 CPR Encoder, 6151 RPM     "," 9234S007 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9234S007 9234S007 Motor with 500 ppr, 3 channel (A,B,I) encoderRated voltage: 24 VDC 6.1 oz-in continuous torque 41.3 oz-in peak torque No load speed 6,151 rpm Torque constant (Kt) = 5.17 oz-in / amp Voltage constant (Ke) = 3.82 volts / krpm Resistance (R) = 2.96 ohms Inductance (I) = 2.51 mh Length (motor with encoder) = 3.1 197.12 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[94]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9234S006.aspx","2008-08-14","9K","9234S006    ","9234S006     ","24V, DC Motor, 1.58 Diameter, 6151 RPM     "," 9234S006 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9234S006 9234S006 Motor only Rated voltage: 24 VDC 6.1 oz-in continuous torque 41.3 oz-in peak torque No load speed 6,151 rpm Torque constant (Kt) = 5.17 oz-in / amp Voltage constant (Ke) = 3.82 volts / krpm Resistance (R) = 2.96 ohms Inductance (I) = 2.51 mh Length (motor only) = 2.4 87.74 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[95]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9234S005.aspx","2008-08-14","9K","9234S005    ","9234S005     ","12V, 1.58 Diameter Motor w/ 500 CPR Encoder, 6151 RPM     "," 9234S005 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9234S005 9234S005 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 12 VDC 6.1 oz-in continuous torque 41.3 oz-in peak torque No load speed 6,151 rpm Torque constant (Kt) = 2.58 oz-in / amp Voltage constant (Ke) = 1.91 volts / krpm Resistance (R) = 0.83 ohms Inductance (I) = 0.63 mh Length (motor with encoder) = 3.1 196.37 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[96]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9234S004.aspx","2008-08-14","9K","9234S004    ","9234S004     ","12V, DC Motor, 1.58 Diameter, 6151 RPM     "," 9234S004 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9234S004 9234S004 Motor only Rated voltage: 12 VDC 6.1 oz-in continuous torque 41.3 oz-in peak torque No load speed 6,151 rpm Torque constant (Kt) = 2.58 oz-in / amp Voltage constant (Ke) = 1.91 volts / krpm Resistance (R) = 0.83 ohms Inductance (I) = 0.63 mh Length (motor only) = 2.4 86.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[97]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9233S013.aspx","2008-08-14","9K","9233S013    ","9233S013     ","24V, DC Motor, 1.58 Diameter, 5993 RPM     "," 9233S013 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9233S013 9233S013 Motor only (no encoder option) Rated voltage: 24 VDC 4.7 oz-in continuous torque 31.6 oz-in peak torque No load speed 5,993 rpm Torque constant (Kt) = 5.28 oz-in / amp Voltage constant (Ke) = 3.9 volts / krpm Resistance (R) = 3.94 ohms Inductance (I) = 3.29 mh Length (motor only) = 2.2 85.82 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[98]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9233S012.aspx","2008-08-14","9K","9233S012    ","9233S012     ","12V, DC Motor, 1.58 Diameter, 5993 RPM     "," 9233S012 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9233S012 9233S012 Motor only (no encoder option) Rated voltage: 12 VDC 4.7 oz-in continuous torque 31.6 oz-in peak torque No load speed 5,993 rpm Torque constant (Kt) = 2.67 oz-in / amp Voltage constant (Ke) = 1.98 volts / krpm Resistance (R) = 1.08 ohms Inductance (I) = 0.84 mh Length (motor only) = 2.2 85.07 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[99]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9232S003.aspx","2008-08-14","9K","9232S003    ","9232S003     ","24V, 1.58 Diameter Motor w/ 500 CPR Encoder, 7015 RPM     "," 9232S003 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9232S003 9232S003 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 24 VDC 2.3 oz-in continuous torque 13.8 oz-in peak torque No load speed 7,015 rpm Torque constant (Kt) = 4.4 oz-in / amp Voltage constant (Ke) = 3.25 volts / krpm Resistance (R) = 7.38 ohms Inductance (I) = 4.64 mh Length (motor only) = 1.83 193.68 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[100]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9232S002.aspx","2008-08-14","9K","9232S002    ","9232S002     ","24V, DC Motor, 1.58 Diameter, 7015 RPM     "," 9232S002 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9232S002 9232S002 Motor only Rated voltage: 24 VDC 2.3 oz-in continuous torque 13.8 oz-in peak torque No load speed 7,015 rpm Torque constant (Kt) = 4.4 oz-in / amp Voltage constant (Ke) = 3.25 volts / krpm Resistance (R) = 7.38 ohms Inductance (I) = 4.64 mh Length (motor only) = 1.83 84.30 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[101]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000/9232S001.aspx","2008-08-14","9K","9232S001    ","9232S001     ","12V, 1.58 Diameter Motor w/ 500 CPR Encoder, 7015 RPM     "," 9232S001 View Cart Products >> 9000 Series Brush Commutated DC Servo Motors >>9232S001 9232S001 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 12 VDC 2.3 oz-in continuous torque 13.8 oz-in peak torque No load speed 7,015 rpm Torque constant (Kt) = 2.2 oz-in / amp Voltage constant (Ke) = 1.63 volts / krpm Resistance (R) = 1.93 ohms Inductance (I) = 1.16 mh Length (motor with encoder) = 2.52 192.93 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[102]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8324S007.aspx","2008-08-14","9K","8324S007    ","8324S007     ","24V, DC Motor, 1.175 Diameter, 10158 RPM     "," 8324S007 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8324S007 8324S007 Motor with 500 ppr, 3 channel (A,B,I) optical encoderRated voltage: 24 VDC 2.62 oz-in continuous torque 16.8 oz-in peak torque No load speed 10,158 rpm Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 volts / krpm Resistance (R) = 4.33 ohms Inductance (I) = 2.34 mh Length (motor only) = 3.04 197.12 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[103]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8324S006.aspx","2008-08-14","9K","8324S006    ","8324S006     ","24V, DC Motor, 1.175 Diameter, 10158 RPM     "," 8324S006 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8324S006 8324S006 Motor only Rated voltage: 24 VDC 2.62 oz-in continuous torque 16.8 oz-in peak torque No load speed 10,158 rpm Torque Constant (Kt) = 3.09 oz-in / amp Voltage Constant (Ke) = 2.29 volts / krpm Resistance (R) = 4.33 ohms Inductance (I) = 2.34 mh Length (motor only) = 2.38 87.74 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[104]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/ST_Series.aspx","2008-08-14","11K","Pittman Series ST Slotted Brushless DC Servo Motors    ","",""," Pittman Series ST Slotted Brushless DC Servo Motors View Cart Pittman ST Series Slotted Brushless DC Servo Motors Features 3-phase slotted stator 6-slot lamination design 4-pole rotor featuring bonded neodymium iron boron magnets Ball bearings standard Precision ground hardened stainless steel shafts 6-step commutation at 120 electrical degrees NEMA 23 mounting configuration Pittman brand ELCOM ST™ slotted brushless DC motors have internal Hall sensor feedback for linear speed-torque characteristics, high starting torque and variable speed control with appropriate drive electronics. These motors were designed for high volume manufacturing and low unit cost as the primary criteria. Modifications to the shaft, winding and mechanical mounting are available for OEM applications. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[105]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8324S005.aspx","2008-08-14","9K","8324S005    ","8324S005     ","12V, 1.175 Diameter Motor w/ 500 CPR Encoder, 10158 RPM     "," 8324S005 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8324S005 8324S005 Motor with 500 ppr, 3 channel (A,B,I) optical encoder Rated voltage: 12 VDC 2.62 oz-in continuous torque 16.8 oz-in peak torque No load speed 10,158 rpm Torque Constant (Kt) = 1.54 oz-in / amp Voltage Constant (Ke) = 1.14 volts / krpm Resistance (R) = 1.17 ohms Inductance (I) = 0.58 mh Length (motor with encoder) = 3.04 196.37 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[106]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8324S004.aspx","2008-08-14","9K","8324S004    ","8324S004     ","12V, DC Motor, 1.175 Diameter, 10158 RPM     "," 8324S004 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8324S004 8324S004 Motor only Rated voltage: 12 VDC 2.62 oz-in continuous torque 16.8 oz-in peak torque No load speed 10,158 rpm Torque Constant (Kt) = 1.54 oz-in / amp Voltage Constant (Ke) = 1.14 volts / krpm Resistance (R) = 1.17 ohms Inductance (I) = 0.58 mh Length (motor only) = 2.38 86.98 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[107]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8322S008.aspx","2008-08-14","9K","8322S008    ","8322S008     ","12V, DC Motor, 1.175 Diameter, 7847 RPM     "," 8322S008 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8322S008 8322S003 1.58 oz-in continuous torque 7.4 oz-in peak torque No load speed 7847 rpm Torque constant (Kt) = 1.94 oz-in / amp Voltage constant (Ke) = 1.43 volts / krpm Resistance (R) = 3.1 ohms Inductance (I) = 1.57 mh Length (motor only) = 2.0 83.55 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[108]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8322S003.aspx","2008-08-14","9K","8322S003    ","8322S003     ","24V, 1.175 Diameter Motor w/ 500 CPR Encoder, 7847 RPM     "," 8322S003 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8322S003 8322S003 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 24 VDC 1.58 oz-in continuous torque 7.4 oz-in peak torque No load speed 7847 rpm Torque constant (Kt) = 3.88 oz-in / amp Voltange constant (Ke) = 2.87 volts / krpm Resistance (R) = 12.1 ohms Inductance (I) = 6.27 mh Length (motor with encoder) = 2.67 193.68 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[109]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8322S002.aspx","2008-08-14","9K","8322S002    ","8322S002     ","24V, DC Motor, 1.175 Diameter, 7847 RPM     "," 8322S002 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8322S002 8322S002 1.58 oz-in continuous torque 7.4 oz-in peak torque No load speed 7847 rpm Torque constant (Kt) = 3.88 oz-in / amp Voltage constant (Ke) = 2.87 volts / krpm Resistance (R) = 12.1 ohms Inductance (I) = 6.27 mh Length (motor only) = 2.0 84.30 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[110]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000/8322S001.aspx","2008-08-14","9K","8322S001    ","8322S001     ","24V, 1.175 Diameter Motor w/ 500 CPR Encoder, 7847 RPM     "," 8322S001 View Cart Products >> 8000 Series Brush Commutated DC Servo Motors >>8322S001 8322S001 1.58 oz-in continuous torque 7.4 oz-in peak torque No load speed 7847 rpm Torque constant (Kt) = 1.94 oz-in / amp Voltage constant (Ke) = 1.43 volts / krpm Resistance (R) = 3.1 ohms Inductance (I) = 1.57 mh Length (motor only) = 2.0 192.93 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[111]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/6000/6313S004-R1.aspx","2008-08-14","9K","6313S004-R1    ","6313S004-R1     ","Pittman 24V DC Motor, 0.86 Diameter, 7780 RPM     "," 6313S004-R1 View Cart Products >> 6000 Series Brush Commutated DC Servo Motors >> 6313S004-R1 6313S004-R1 Rated voltage: 24 VDC 1.3 oz-in continuous torque 5.6 oz-in peak torque No load speed 7,780 rpm Torque constant (Kt) = 4.04 oz-in / amp Voltange constant (Ke) = 2.99 volts / krpm Resistance (R) = 16.9 ohms Inductance (I) = 11 mh Length (motor only) = 1.56 106.14 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[112]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/6000/6313S003-R1.aspx","2008-08-14","9K","6312S003-R1    ","6313S003-R1     ","Pittman 12V DC Motor, 0.86 Diameter, 7780 RPM     "," 6312S003-R1 View Cart Products >> 6000 Series Brush Commutated DC Servo Motors >> 6312S002-R1 6312S003-R1 Rated voltage: 12 VDC 1.3 oz-in continuous torque 5.6 oz-in peak torque No load speed 7,780 rpm Torque constant (Kt) = 2.2 oz-in / amp Voltange constant (Ke) = 1.49 volts / krpm Resistance (R) = 4.19 ohms Inductance (I) = 2.76 mh Length (motor only) = 1.56 105.39 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[113]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/6000/6312S002-R1.aspx","2008-08-14","9K","6312S002-R1    ","6312S002-R1     ","Pittman 24V DC Motor, 0.86 Diameter, 8260 RPM     "," 6312S002-R1 View Cart Products >> 6000 Series Brush Commutated DC Servo Motors >> 6312S002-R1 6312S002-R1 Voltage: 24 VDC 0.8 oz-in continuous torque 2.7 oz-in peak torque No load speed 8,260 rpm Torque constant (Kt) = 1.85 oz-in / amp Voltange constant (Ke) = 1.37 volts / krpm Resistance (R) = 7.75 ohms Inductance (I) = 4.05 mh Length = 1.26 103.21 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[114]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14207S008.aspx","2008-08-14","9K","14207S008    ","14207S008     ","24V 2.125 Diameter Motor w/500 CPR Encoder, 3211 RPM     "," 14207S008 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14207S008 14207S008 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 24 VDC 50 oz-in continuous torque 410 oz-in peak torque No load speed 3,211 rpm Torque constant (Kt) = 10 oz-in / amp Voltage constant (Ke) = 7.39 volts / krpm Resistance (R) = 0.59 ohms Inductance (I) = 0.87 mh Length (motor only) = 6.3 297.10 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[115]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14207S007.aspx","2008-08-14","9K","14207S007    ","14207S007     ","24V DC Motor, 2.125 Diameter, 3211 RPM     "," 14207S007 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14207S007 14207S007 Motor only Rated voltage: 24 VDC 50 oz-in continuous torque 410 oz-in peak torque No load speed 3,211 rpm Torque constant (Kt) = 10 oz-in / amp Voltage constant (Ke) = 7.39 volts / krpm Resistance (R) = 0.59 ohms Inductance (I) = 0.87 mh Length (motor only) = 5.7 187.72 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[116]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14206S011.aspx","2008-08-14","9K","14206S011    ","14206S011     ","24V DC Motor, 2.125 Diameter, 3216 RPM     "," 14206S011 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14206S011 14206S011 Motor only Rated voltage: 24 VDC 36.5 oz-in continuous torque 284 oz-in peak torque No load speed 3,216 rpm Torque constant (Kt) = 10 oz-in / amp Voltage constant (Ke) = 7.39 volts / krpm Resistance (R) = 0.84 ohms Inductance (I) = 1.36 mh Length (motor only) = 5 174.76 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[117]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14204S006.aspx","2008-08-14","9K","14204S006    ","14204S006     ","24V 2.125 Diameter Motor w/500 CPR Encoder, 3702 RPM     "," 14204S006 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14204S006 14204S006 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 24 VDC 26 oz-in continuous torque 204 oz-in peak torque No load speed 3,702 rpm Torque constant (Kt) = 8.67 oz-in / amp Voltage constant (Ke) = 6.41 volts / krpm Resistance (R) = 1.01 ohms Inductance (I) = 1.6 mh Length (motor with encoder) = 4.7 261.83 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[118]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14204S005.aspx","2008-08-14","9K","14204S005    ","14204S005     ","24V DC Motor, 2.125 Diameter, 3702 RPM     "," 14204S005 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14204S005 14204S005 Motor only Rated voltage: 24 VDC 26 oz-in continuous torque 204 oz-in peak torque No load speed 3,702 rpm Torque constant (Kt) = 8.67 oz-in / amp Voltage constant (Ke) = 6.41 volts / krpm Resistance (R) = 1.01 ohms Inductance (I) = 1.6 mh Length (motor only) = 4.1 152.45 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[119]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14204S004.aspx","2008-08-14","9K","14204S004    ","14204S004     ","12V 2.125 Diameter Motor w/500 CPR Encoder, 3702 RPM     "," 14204S004 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14204S004 14204S004 Motor with 500 ppr, 3 channel (A,B,I)encoder Rated voltage: 12 VDC 26 oz-in continuous torque 204 oz-in peak torque No load speed 3,702 rpm Torque constant (Kt) = 4.33 oz-in / amp Voltage constant (Ke) = 3.21 volts / krpm Resistance (R) = 0.27 ohms Inductance (I) = 0.4 mh Length (motor only) = 4.7 261.08 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[120]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14203S010.aspx","2008-08-14","9K","14203S010    ","14203S010     ","12V DC Motor, 2.125 Diameter, 3456 RPM     "," 14203S010 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14203S010 14203S010 Motor only Rated voltage: 12 VDC 21 oz-in continuous torque 159 oz-in peak torque No load speed 3,456 rpm Torque constant (Kt) = 4.63 oz-in / amp Voltage constant (Ke) = 3.42 volts / krpm Resistance (R) = 0.37 ohms Inductance (I) = 0.56 mh Length (motor only) = 3.7 145.37 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[121]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14203S009.aspx","2008-08-14","9K","14203S009    ","14203S009     ","24V DC Motor, 2.125 Diameter, 3456 RPM     "," 14203S009 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14203S009 14203S009 Motor only Rated voltage: 24 VDC 21 oz-in continuous torque 159 oz-in peak torque No load speed 3,456 rpm Torque constant (Kt) = 9.26 oz-in / amp Voltage constant (Ke) = 6.85 volts / krpm Resistance (R) = 1.38 ohms Inductance (I) = 2.26 mh Length (motor only) = 3.7 146.12 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[122]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14201S003.aspx","2008-08-14","9K","14201S003    ","14201S003     ","24V 2.125 Diameter Motor w/500 CPR Encoder, 4230 RPM     "," 14201S003 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14201S003 14201S003 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 24 VDC 10 oz-in continuous torque 62.8 oz-in peak torque No load speed 4,230 rpm Torque constant (Kt) = 7.44 oz-in / amp Voltage constant (Ke) = 5.5 volts / krpm Resistance (R) = 2.79 ohms Inductance (I) = 2.54 mh Length (motor with encoder) = 3.6 247.86 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[123]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14201S002.aspx","2008-08-14","9K","14201S002    ","14201S002     ","24V DC Motor, 2.125 Diameter, 4230 RPM     "," 14201S002 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14201S002 14201S002 Motor only Rated voltage: 24 VDC 10 oz-in continuous torque 62.8 oz-in peak torque No load speed 4,230 rpm Torque constant (Kt) = 7.44 oz-in / amp Voltage constant (Ke) = 5.5 volts / krpm Resistance (R) = 2.79 ohms Inductance (I) = 2.54 mh Length (motor only) = 3.0 138.48 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[124]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000/14201S001.aspx","2008-08-14","9K","14201S001    ","14201S001     ","12V 2.125 Diameter Motor w/500 CPR Encoder, 4230 RPM     "," 14201S001 View Cart Products >>LO COG 14000 Series Brush Commutated Motors >>14201S001 14201S001 Motor with 500 ppr, 3 channel (A,B,I) encoder Rated voltage: 12 VDC 10 oz-in continuous torque 62.8 oz-in peak torque No load speed 4,230 rpm Torque constant (Kt) = 3.72 oz-in / amp Voltage constant (Ke) = 2.75 volts / krpm Resistance (R) = 0.72 ohms Inductance (I) = 0.63 mh Length (motor with encoder) = 3.6 247.11 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[125]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/SL_Series.aspx","2008-08-14","11K","Pittman Series ST Slotted Brushless DC Servo Motors    ","",""," Pittman Series ST Slotted Brushless DC Servo Motors View Cart Pittman SL Series Slotted Brushless DC Servo Motors Features 3-phase slotless stator 4-pole rotor featuring neodymium iron boron magnets Stators are epoxy-impregnated, using film-insulated magnet wire Precision ground hardened stainless steel shafts Standard ABEC-3 ball bearings 6-step commutation at 60 electrical degrees Zinc-plated endbells with chromate conversion coating Rugged metal housings Pittman brand ELCOM SL™ motors feature cost effective construction and offer high performance, long life, and smooth, quiet operation. Pittmans slotless stator design offers many advantages over conventional slotted stator construction. Negligible magnetic cogging enables extremely smooth, quiet motion. Low inductance and high current bandwidth provide precise control, especially during rapid acceleration in demanding incremental motion applications. A large magnetic air gap minimizes viscous torque losses for efficient operation at high speeds. Slotless construction also provides excellent winding heat transfer for high thermal efficiency and transient load capacity. Robust rotor construction allows rotational speeds up to 8,000 RPM. ELCOM® motors may be supplied with or without hall sensor feedback for 6-step commutation at 60 electrical degrees. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[126]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/LC_Motors.aspx","2008-08-14","11K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart LO-COG® Brush-Commutated Servo Motors 8000 Series 1.175 Motor Diameter Speeds from 7,700 to 10,650 Continuous torque range from 1.3 to 2.6 oz-in Peak torques from 7.4 to 16.8 oz-in available in 2 lengths 7 slot armature encoder option available 9000 Series 1.58 Motor Diameter Speeds from 7,700 to 10,650 Continuous torque range from 2.3 to 11 oz-in Peak torques from 13.88 to 77 oz-in available in 5 lengths 7 slot armature encoder option available 14000 Series 2.125 Motor Diameter Speeds from 3050 to 42.30 Continuous torque range from 10 to 50 oz-in Peak torques from 62.8 to 410 oz-in available in 5 lengths 11 slot armature encoder option available Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[127]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM9000_Series.aspx","2008-08-14","12K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman Series GM9000 Brush Commutated DC Gearmotors Features Output torques to 500 oz-in Multiple reduction ratios from 5.9:1 to 218.4:1 Skewed, 7-slot armature reduces magnetic cogging at low speeds Long, maintenance-free operation Diamond-turned commutators ensure maximum brush life Stators are constructed of M-10 ceramic magnets enclosed in heavy-gauge steel return rings Standard copper-graphite or optional silver-graphite brushes Precision ground hardened stainless steel Silicon-steel laminations Ball bearings or sleeve bearings available Pittman brand LO-COGbrush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears and are available with several reduction ratios and torque ratings to provide an economical solution for a wide range of applications. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[128]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM8000_Series.aspx","2008-08-14","12K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman Series GM8000 Brush Commutated DC Gearmotors Features Output torques to 175 oz-in 8 standard reduction ratios from 6.3:1 to 187.7:1 Skewed, 7-slot armature reduces magnetic cogging at low speeds Long, maintenance-free operation Diamond-turned commutators ensure maximum brush life Ball bearings or sleeve bearings available Pittman brand LO-COGbrush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears and are available with several reduction ratios and torque ratings to provide an economical solution for a wide range of applications. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[129]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/GM14000_Series.aspx","2008-08-14","12K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman Series GM14000 Brush Commutated DC Gearmotors Features Output torques to 1,125 oz-in 4 standard ratios from 5.9:1 to 65.5:1 Skewed, 11-slot armature reduces magnetic cogging at low speeds Long, maintenance-free operation Diamond-turned commutators ensure maximum brush life Copper-graphite brushes Standard sintered nickel-steel gears Stators are constructed of M-8 ceramic magnets enclosed in heavy-gauge steel return rings Precision ground hardened stainless steel Ball bearing Pittman brand LO-COGbrush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears and are available with several reduction ratios and torque ratings to provide an economical solution for a wide range of applications. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[130]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/Gearmotors.aspx","2008-08-14","9K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart LO-COG® Brush-Commutated Gearmotors GM8000 Series • 11 ratios from 6.3.1 to 1803.6.1 • Peak Torques to 100 oz·in standard • 160 and 175 oz·in gearheads optional • Available in 3 motor lengths • Encoder resolutions from 96 to 1024 GM9000 Series • 12 ratios from 5.9.1 to 4732.5.1 • Peak Torques to 175 oz·in standard • 300 and 500 oz·in gearheads optional • Available in 6 motor lengths • Encoder resolutions from 96 to 2048 GM14000 Series • 4 ratios from 5.9.1 to 218.4.1 • Peak Torques to 175 oz·in standard • 300 and 500 oz·in gearheads optional • Available in 7 motor lengths • Encoder resolutions from 96 to 2048 Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[131]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/9000_Series.aspx","2008-08-14","11K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman LO COG Series 9000 Brush Commutated DC Motors Features 1.58 Diameter brush motors 2-pole permanent magnet stator skewed armatures to minimize cogging standard copper graphite brushes precision ground hardened stainless steel shafts ball bearings available in 5 lengths 7 slot armature speeds from 4,900 to 7,015 rpm peak torques from 13.8 to 77 oz-in encoder option Pittman brand LO-COGbrush-commutated DC motors offer smooth, quiet operation and long life. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[132]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/8000_Series.aspx","2008-08-14","11K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman LO COG Series 8000 Brush Commutated DC Motors Features 1.175 Motor Diameter 2-pole permanent magnet stator skewed armatures to minimize cogging standard copper graphite brushes precision ground hardened stainless steel shafts Ball bearings available in 2 lengths 7 slot armature speeds from 7,700 to 10,650 peak torques from 7.4 to 16.8 oz-in encoder option available Pittman brand LO-COGbrush-commutated DC motors offer smooth, quiet operation and long life. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[133]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/6000_Series.aspx","2008-08-14","12K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman LO COG Series 6000 Brush Commutated DC Motors Features. 5-slot skewed armature 2-pole permanent magnet stators are constructed of bonded neodymium iron boron magnets Diamond turned commutators ensure maximum brush life Standard copper graphite brushes Precision ground hardened stainless steel shafts Silicon-steel laminations Ball bearings Pittman brand LO-COG® low cost, high performance 22 millimeter diameter brush-commutated DC motors are ideal for use in applications requiring the power of an ironless core or coreless motor, without the associated cost. This addition to our LO-COG® family is designed for use in image processing, semiconductor processing and mass data storage equipment, computer peripherals and office automation, as well as other applications for the medical and industrial markets. By using a skewed 5-slot armature design and bonded neodymium iron boron magnets, this motor provides more power than most other DC motors of similar size. Cost effective planetary gearheads are available to meet application specific speed and torque requirements. Our unique cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motion control, optical encoders are available in 2 or 3 channel versions. Other encoders are available with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[134]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/14000_Series.aspx","2008-08-14","11K","Automation Express - Your Online Source for Industrial Automation and Networking Products    ","",""," Automation Express - Your Online Source for Industrial Automation and Networking Products View Cart Pittman LO COG Series 14000 Brush Commutated DC Motors Features 2.125 Diameter brush motors 2-pole permanent magnet stator skewed armatures to minimize cogging standard copper graphite brushes precision ground hardened stainless steel shafts ball bearings available in 5 lengths 11 slot armature speeds from 3.050 to 4,230 peak torques from 62.8 to 410 oz-in encoder option available Pittman brand LO-COGbrush-commutated DC motors offer smooth, quiet operation and long life. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability in incremental motion applications. An innovative cartridge brush assembly reduces audible and electrical noise and significantly improves brush life by maintaining optimum brush force throughout the life of the motor. For precision motor control, Hewlett-Packard optical encoders are available in 2 or 3 channel versions with several CPR ranges to meet your position, velocity and direction feedback needs. Ordering Information FooterStyle BackColor=#FFFFCC ForeColor=#330099 / RowStyle BackColor=White ForeColor=#330099 Font-Size=Medium / Columns Home/a | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[135]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/6000/6312S001-R1.aspx","2008-08-14","7K","6312S001-R1    ","6312S001-R1     ","Pittman 12V DC Motor, 0.86 Diameter, 8260 RPM     "," 6312S001-R1 View Cart Search This Site Products >> 6000 Series Brush Commutated DC Servo Motors >> 6312S001-R1 6312S001-R1 Voltage: 12 VDC 0.8 oz-in continuous torque 2.7 oz-in peak torque No load speed 8,260 rpm Torque constant (Kt) = 1.85 oz-in / amp Voltange constant (Ke) = 1.37 volts / krpm Resistance (R) = 7.75 ohms Inductance (I) = 4.05 mh Length = 1.26 102.46 Home | About | Contact | Privacy Policy Copyright Automation Express 2008 All Rights Reserved     ");
array_files[136]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2342S004.pdf","2001-10-17","124K"," slotted.PDF    ","","","");
array_files[137]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2342S003.pdf","2001-10-17","125K"," slotted.PDF    ","","","");
array_files[138]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2341S002.pdf","2001-10-17","125K"," slotted.PDF    ","","","");
array_files[139]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2341S001.pdf","2001-10-17","126K"," slotted.PDF    ","","","");
array_files[140]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2312A014.pdf","2001-10-17","113K"," slotted.PDF    ","","","");
array_files[141]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2312A013.pdf","2001-10-17","114K"," slotted.PDF    ","","","");
array_files[142]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2311A012.pdf","2001-10-17","114K"," slotted.PDF    ","","","");
array_files[143]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/N2311A011.pdf","2001-10-17","115K"," slotted.PDF    ","","","");
array_files[144]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9634S003.pdf","2001-10-17","131K"," Catalog.PDF    ","","","");
array_files[145]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9634S002.pdf","2001-10-17","132K"," Catalog.PDF    ","","","");
array_files[146]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9413-5.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[147]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9413-4.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[148]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9413-3.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[149]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9413-2.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[150]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9413-1.pdf","2001-10-17","145K"," Catalog.PDF    ","","","");
array_files[151]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S027.pdf","2001-10-17","140K"," Catalog.PDF    ","","","");
array_files[152]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S026.pdf","2001-10-17","136K"," Catalog.PDF    ","","","");
array_files[153]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S025.pdf","2001-10-17","141K"," Catalog.PDF    ","","","");
array_files[154]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S024.pdf","2001-10-17","138K"," Catalog.PDF    ","","","");
array_files[155]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S021.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[156]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S020.pdf","2001-10-17","138K"," Catalog.PDF    ","","","");
array_files[157]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S019.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[158]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S018.pdf","2001-10-17","139K"," Catalog.PDF    ","","","");
array_files[159]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S015.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[160]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S014.pdf","2001-10-17","140K"," Catalog.PDF    ","","","");
array_files[161]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S013.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[162]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9236S012.pdf","2001-10-17","140K"," Catalog.PDF    ","","","");
array_files[163]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S033.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[164]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S032.pdf","2001-10-17","141K"," Catalog.PDF    ","","","");
array_files[165]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S031.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[166]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S030.pdf","2001-10-17","141K"," Catalog.PDF    ","","","");
array_files[167]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S029.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[168]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S028.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[169]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S023.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[170]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S022.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[171]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S017.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[172]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM9234S016.pdf","2001-10-17","145K"," Catalog.PDF    ","","","");
array_files[173]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S029.pdf","2001-10-17","126K"," Catalog.PDF    ","","","");
array_files[174]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S028.pdf","2001-10-17","122K"," Catalog.PDF    ","","","");
array_files[175]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S027.pdf","2001-10-17","127K"," Catalog.PDF    ","","","");
array_files[176]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S026.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[177]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S025.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[178]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S024.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[179]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S023.pdf","2001-10-17","128K"," Catalog.PDF    ","","","");
array_files[180]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S022.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[181]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S021.pdf","2001-10-17","128K"," Catalog.PDF    ","","","");
array_files[182]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S020.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[183]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S019.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[184]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S018.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[185]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S017.pdf","2001-10-17","129K"," Catalog.PDF    ","","","");
array_files[186]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S016.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[187]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S015.pdf","2001-10-17","129K"," Catalog.PDF    ","","","");
array_files[188]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S014.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[189]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S013.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[190]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S012.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[191]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S011.pdf","2001-10-17","130K"," Catalog.PDF    ","","","");
array_files[192]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S010.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[193]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S009.pdf","2001-10-17","131K"," Catalog.PDF    ","","","");
array_files[194]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8724S008.pdf","2001-10-17","121K"," Catalog.PDF    ","","","");
array_files[195]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8712S030.pdf","2001-10-17","120K"," Catalog.PDF    ","","","");
array_files[196]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8712-41.pdf","2001-10-17","119K"," Catalog.PDF    ","","","");
array_files[197]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8712-31.pdf","2001-10-17","119K"," Catalog.PDF    ","","","");
array_files[198]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8712-21.pdf","2001-10-17","120K"," Catalog.PDF    ","","","");
array_files[199]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM8712-11.pdf","2001-10-17","119K"," Catalog.PDF    ","","","");
array_files[200]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S016.pdf","2001-10-17","138K"," Catalog.PDF    ","","","");
array_files[201]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S015.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[202]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S014.pdf","2001-10-17","141K"," Catalog.PDF    ","","","");
array_files[203]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S013.pdf","2001-10-17","143K"," Catalog.PDF    ","","","");
array_files[204]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S012.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[205]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S011.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[206]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S010.pdf","2001-10-17","144K"," Catalog.PDF    ","","","");
array_files[207]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14904S009.pdf","2001-10-17","146K"," Catalog.PDF    ","","","");
array_files[208]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14902S020.pdf","2001-10-17","145K"," Catalog.PDF    ","","","");
array_files[209]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14902S019.pdf","2001-10-17","147K"," Catalog.PDF    ","","","");
array_files[210]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14902S018.pdf","2001-10-17","146K"," Catalog.PDF    ","","","");
array_files[211]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14902S017.pdf","2001-10-17","148K"," Catalog.PDF    ","","","");
array_files[212]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/GM14604S002.pdf","2001-10-17","142K"," Catalog.PDF    ","","","");
array_files[213]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9237S011.PDF","2001-10-17","119K"," 9000.PDF    ","","","");
array_files[214]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9237S010.PDF","2001-10-17","116K"," 9000.PDF    ","","","");
array_files[215]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9236S009.PDF","2001-10-17","119K"," 9000.PDF    ","","","");
array_files[216]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9236S008.PDF","2001-10-17","117K"," 9000.PDF    ","","","");
array_files[217]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9234S007.PDF","2001-10-17","118K"," 9000.PDF    ","","","");
array_files[218]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9234S006.PDF","2001-10-17","115K"," 9000.PDF    ","","","");
array_files[219]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9234S005.PDF","2001-10-17","118K"," 9000.PDF    ","","","");
array_files[220]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9234S004.PDF","2001-10-17","115K"," 9000.PDF    ","","","");
array_files[221]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9233S013.PDF","2001-10-17","114K"," 9000.PDF    ","","","");
array_files[222]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9233S012.PDF","2001-10-17","114K"," 9000.PDF    ","","","");
array_files[223]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9232S003.PDF","2001-10-17","118K"," 9000.PDF    ","","","");
array_files[224]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9232S002.PDF","2001-10-17","116K"," 9000.PDF    ","","","");
array_files[225]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/9232S001.PDF","2001-10-17","118K"," 9000.PDF    ","","","");
array_files[226]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8324S007.PDF","2001-10-17","122K"," 8000.PDF    ","","","");
array_files[227]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8324S006.PDF","2001-10-17","112K"," 8000.PDF    ","","","");
array_files[228]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8324S005.PDF","2001-10-17","122K"," 8000.PDF    ","","","");
array_files[229]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8324S004.PDF","2001-10-17","112K"," 8000.PDF    ","","","");
array_files[230]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8322S008.PDF","2001-10-17","112K"," 8000.PDF    ","","","");
array_files[231]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8322S003.PDF","2001-10-17","122K"," 8000.PDF    ","","","");
array_files[232]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8322S002.PDF","2001-10-17","112K"," 8000.PDF    ","","","");
array_files[233]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/8322S001.PDF","2001-10-17","122K"," 8000.PDF    ","","","");
array_files[234]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/6313S004-R1.PDF","2001-10-17","116K"," 6000.PDF    ","","","");
array_files[235]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/6313S003-R1.PDF","2001-10-17","116K"," 6000.PDF    ","","","");
array_files[236]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/6312S002-R1.PDF","2001-10-17","116K"," 6000.PDF    ","","","");
array_files[237]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/6312S001-R1.PDF","2001-10-17","116K"," 6000.PDF    ","","","");
array_files[238]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/5441S006.pdf","2001-10-17","124K"," slotless.PDF    ","","","");
array_files[239]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/5441S005.pdf","2001-10-17","125K"," slotless.PDF    ","","","");
array_files[240]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4443S014.pdf","2001-10-17","128K"," slotless.PDF    ","","","");
array_files[241]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4443S013.pdf","2001-10-17","129K"," slotless.PDF    ","","","");
array_files[242]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4442S012.pdf","2001-10-17","125K"," slotless.PDF    ","","","");
array_files[243]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4442S011.pdf","2001-10-17","126K"," slotless.PDF    ","","","");
array_files[244]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4441S010.pdf","2001-10-17","129K"," slotless.PDF    ","","","");
array_files[245]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/4441S009.pdf","2001-10-17","130K"," slotless.PDF    ","","","");
array_files[246]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/3442S004-R3.pdf","2001-10-17","127K"," slotless.PDF    ","","","");
array_files[247]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/3442S003-R3.pdf","2001-10-17","128K"," slotless.PDF    ","","","");
array_files[248]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/3441S002-R3.pdf","2001-10-17","132K"," slotless.PDF    ","","","");
array_files[249]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/3441S001-R3.pdf","2001-10-17","132K"," slotless.PDF    ","","","");
array_files[250]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14207S008.PDF","2001-10-17","128K"," 14000.PDF    ","","","");
array_files[251]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14207S007.PDF","2001-10-17","121K"," 14000.PDF    ","","","");
array_files[252]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14206S011.PDF","2001-10-17","121K"," 14000.PDF    ","","","");
array_files[253]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14204S006.PDF","2001-10-17","125K"," 14000.PDF    ","","","");
array_files[254]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14204S005.PDF","2001-10-17","120K"," 14000.PDF    ","","","");
array_files[255]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14204S004.PDF","2001-10-17","125K"," 14000.PDF    ","","","");
array_files[256]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14203S010.PDF","2001-10-17","120K"," 14000.PDF    ","","","");
array_files[257]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14203S009.PDF","2001-10-17","120K"," 14000.PDF    ","","","");
array_files[258]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14201S003.PDF","2001-10-17","124K"," 14000.PDF    ","","","");
array_files[259]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14201S002.PDF","2001-10-17","119K"," 14000.PDF    ","","","");
array_files[260]=new Array(0,4,"http://www.automationexpress.com/products/DC_Motors/pdf/14201S001.PDF","2001-10-17","124K"," 14000.PDF    ","","","");
array_files[261]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/pdf/Desktop%20DB","2001-10-16","630K","http://www.automationexpress.com/products/DC_Motors/pdf/Desktop DB    ","",""," o # Ų ā % Š ē ’ ’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’’€ ų ų x 9 ’ NWIPcdev (j² @NWIPcdev (jņ €NWIPcdev (kr NWIPnDEV (lr NWIPnDEV (mr NWIPnDEV (or NWIPnDEV (sr @NWIPnDEV (s² €NWIPnDEV (t2 NWIPpaul’ (}ņ NvRmAPPL Ļ‚ NvRmAPPL Š‚ NvRmAPPL Ņ‚ NvRmAPPL ւ @NvRmAPPL ÖĀ €NvRmAPPL ×B NvRmAPPL Š‚ NvRmAPPL Š‚ NvRmAPPL Š‚ NvRmAPPL Š‚ Ę°š„nXB, ź Ō ¾ Ø ’ | f P : b Ä’ sicssdev *Š¢ sicssdev *Õā sicssdev *Ńā sicssdev *Ń¢ @sicssdev *Ųā €sicssdev *×ā snd3paulż Y2 snd3paul’ &‚ snd3thng Pr snd3thng U² snd3thng Q² snd3thng Qr @snd3thng X² €snd3thng W² sndvpaulż šŅ sndvsdev č snd3thng Q² snd3thng Q² snd3thng Q² snd3thng Q² Ę°š„nXB, ź Ō ¾ Ø ’ | f P : g %spt2’õ Ļ%spt2’ś Ė%spt2’’ É%srnn’ś Š%srnn’’ [%syav’’ %zak ’’ Ż% ß į% K5 ā% K5 ā% K5 ā ܲˆ^4 ą ¶ Œ b 8 µ e’ ztcpotic Ė ztcppaulż Ž ztcppaul’ &‚ Œnd6INIT   Œnd6INIT „b Œnd6INIT ”b Œnd6INIT ” @Œnd6INIT Øb €Œnd6INIT §b Œnd6paulż Øā Œnd6paul’ &³B Œnd7cdev h Œnd7cdev mR Œnd7cdev iR Œnd7cdev i @Œnd7cdev pR €Œnd7cdev oR Œnd7cdev pR €Œnd7cdev i @Œnd7cdev i @ Ę°š„nXB, ź Ō ¾ Ø ’ | f P : b w’ dlsudspf 8² dlsudspf =ņ dlsudspf 9ņ dlsudspf 9² @dlsudspf @ņ €dlsudspf ?ņ dlsupaulż Ar dlsupaul’ &ĆB dmesdes1ż A‚ dosaTEXT Ž¢ dosaTEXT “ā dosaTEXT ā dosaTEXT ¢ @dosaTEXT –ā €dosaTEXT •ā dosapaul’ &q dosapaul’ &q dosaTEXT Ž¢ dosaTEXT Ž¢ dosaTEXT Ž¢ Ę°š„nXB, ź Ō ¾ Ø ’ | f P : T Y’ cmtrAPPL @cmtrAPPL B €cmtrAPPL B cmtrcmtr Ā cmtrcmtr cmtrcmtr cmtrcmtr Ā @cmtrcmtr €cmtrcmtr cmtrpaulż ‚ cmtrpaul’ ’ cpmgINIT r cpmgINIT ² cmtrcmtr cmtrcmtr cmtrcmtr cmtrcmtr cmtrcmtr cmtrcmtr cmtrcmtr Ę°š„nXB, ź Ō ¾ Ø ’ | f P : ‹ O’ 8INIAPPC R’ 8INIAPPC RR @8INIAPPC Y’ €8INIAPPC X’ 8INIAPPL Z 8INIAPPL _R 8INIAPPL [R 8INIAPPL [ @8INIAPPL bR €8INIAPPL aR 8INIAPPL aR 8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR €8INIAPPL bR € Ę°š„nXB, ź Ō ¾ Ø ’ | f P : W A’ 7INIFERP ‚R 7INIFERP ~R 7INIFERP ~ @7INIFERP …R €7INIFERP „R 7INIFERPż PR 7INIRSET k’ 7INIRSET pŅ 7INIRSET lŅ 7INIRSET l’ @7INIRSET sŅ €7INIRSET rŅ 7INIRSETż NR 7INIblrb      ");
array_files[262]=new Array(0,1,"http://www.automationexpress.com/products/DC_Motors/pdf/Desktop%20DF","2001-07-25","2857K","http://www.automationexpress.com/products/DC_Motors/pdf/Desktop DF    ","",""," ü ģ ž ąž ?ą ~ |` |` x` ?cą’ŽcįÕĪcńŖīcūUn`ūŖępóUfpŖęp?Ugp}ŖĆ0|ÕĆ0|Ē0 ļ8 ’8 ü8’ø’šž ą ü ü ’ü ’ü’’ü?’’ü’’ü’’’ü’’’ü’’’ü’’’ž’’’ž’’ž’’ž’’ž’’ž’’ž’’’’’’?’’’?’’’?’’’?’’’?’’ü?’’ø’šž ą śpĀĀœó™Ļ™Nł@Ažp žžž’ž’ž’’’’’’’’’’’’žp ’’’’ ’’’’’’’’’ ’’’’’’’ż«¤yż’ ’’’’’’’ż«¤yyyyy’’ ’’’’’’’ż«¤yyyyyyyyy’’ ’’’’’’ż«¤yyyyyUOUyyyyy’’ ’’’’’’ż«¤yyyyyUöõ õyyyy’’ ’’’Š«¤yyyyyUOõ öyyy’’ ’’¤yyyyyyUö Oyy’’ ’’¤yyyyOõ yy’’ ’’„yOõ+UV+õłż’’’ßżö Uyž’ ’’«yõ ńńńń«/­’’żżż’’’Võyż’’ ’’Šyö ńńńńń ­’żÄÄÄÄÄ„’’+U¬’’ ’żyU ńńńńńFW’żÄÄÄÄÄÄÄ„’¬ö«’’ ’’yy «ńńńŽF? ’„ÄÄÄÄÄÄÄÄż’ ¤’’ ’’zyõ FFFF? ż’ÄÄÄÄÄÄÄÄÄ„’+y’’ ’’¤yO FFFF9 ż’ÄÄÄÄÄÄÄÄÄ„’÷Oż’ ’’¤yy öööö ü’ćÄÄÄÄÄÄÄÄż’ U«’ ’’«yyö O3333ü’„ÄÄÄÄÄÄÄ„’üõy¤’’ ’’¬yyy 3zž’„ÄÄÄÄÄ„’’zyyz’’ ’żyyyö 3ų’’„„„„ż’’«yyyy’ž ’’yyyy 3 +¬’’’’’ž’’zyy¤’’ ’’yyyyOõõ ö€«¤¤zž’żz¤ż’’ ’’¤yyyyö öUyyyyyy„’’’’’’ž ’’¤yyyyyyOOUyyyyy¤¤«ż’’’’’ž’ ’’«yyyyyyyz¤««żž’’’’’’’ ’’’ ’«yy¤„«ż’’’’’’’’’ ž’ž ’’ż’’’’’’’ž’ ž’’ ’’’’’’ž’ ’’’’’ ’’ ’’ ’’’’ ’’’īgļ ’’’īl||’ ’’’īgĒĒĒĒ’ ’’’īl||||||’ ’’’īgĒĒĒ ĒĒ’ ’~l||| ĢĄ||’ ’gĒĒĒĄ ĀĒ’ ’l|| Ā |’ ’ēĄĒÜ ļ’žĄĒ’ ’ģ ’’įļ’’’żÆš’ēĄ’’ń’ŲŲŁ’Ēļšģp’’ó ßżŸģļš÷Ąļ’£@ßŲŲŲŲßšošüp33@ļ‰üßš÷Ģ33°ļŲŲŲŲŁ÷Źšü| ĢĢ ļš~šžĒĄŻŻļ˜ŲŲŲŸąĘ’ž|p ßł‰’||’ žĒĒ Ģ’ł™’žĒĒ’ ’|| ĄĪ’’’’|v’ ’ĒĒĄĢĢ ĒåW’ēn’ ’l|| Ģ|||ļ’’’ ’gĒĒĒĒĒĒĘnļ’’’ ’ģ|||vīļ’’’š’š ēĘīļ’’’’ ’ ž’’’’š ’š ’’’š ’’ ’Ą ’’’ ’’’’’y’ ’’’’yyyyyy’ ’’’yyyyyyyyyy’ ’yyyyyyy öy’ ’yyyõõłöy’ ’yyńńń’’’’yy’’’yyńńń?’’ÄÄ’’yy’’yõFF?’ÄÄÄÄ’yy’’yyööö3’ćÄÄÄ’yy’’’yö3’’ÄÄ’’yy’ ’yyõõ’’’’’’y’ ’yyyyyyyyyy’’’’ ’yyyyy’’’’’’’’ ’y’’’’’ ’’ ’’’ ’š ’’÷š ’’|||š’ĒĒĒĒĒšü|||Ģš÷Ē ŅĒšü’’’|’÷Ļ’Oų÷Ļü3Oˆˆü÷ĒĒ߈ˆ÷Ļ’|Ņ/ųüĒ ’’’Ļ|||||’’ĒĒĻ’’’š’’’ ’’ ’ų ų€@ą š„9ę;2:Ÿ2ņ€ƒüžą Ą ą īļĄ Ą /wĄ ’’š’ų ’ü ’ž ’’ ’’€’’Ą’’ą’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’š’’šą@0@(@L^^ōL@@LRRōL@üąšųüüüüüüüüüüüüü ’’’’’’’’’’’’’’’’’’ ’ ’’ ’ ööööööööööööööö’+’ ’ öööööööööööööö’’++’ ’ öööööööööö’’’’’’+++’ ’ öööööö’’’’yyyyy’++++’ ’ ööö’’’yyyyyyyyy’+++++’ ’ öö’yyyyyyy ö’’’’’’’’ ’ öö’yyyõõłöy’öööö÷’ ’ öö’yyńńń’’’’yy’’ööö÷’ ’ öö’yyńńń?’’ÄÄ’’yy’ööö÷’ ’ öö’yõFF?’ÄÄÄÄ’yy’ööö÷’ ’ öö’yyööö3’ćÄÄÄ’yy’ööö÷’ ’ öö’’yö3’’ÄÄ’’yy’ööö÷’ ’ ööö’yyõõ’’’’      ");
file_count=263;